The Importance of Movement Joints

7 March, 2016 (16:58)

Fluctuations in temperature and moisture cause movement in the subfloor and lead to cracks transferring to the tile covering, or worse, cause a loss of bond between the covering and the substrate which can result in overall damage to the surface covering. For this reason, industry standards state that all tile and stone installations should include the use of movement joints.

In many circumstances movement joints are overlooked, however, a lack of movement joints can be a contributing factor to many different types of failure.

The question, however, is how do you provide the movement joints necessary to ensure a durable installation and what movement joints should you use?

Movement joints need to go through the tile and screed covering and therefore need to be designed at specification. Understanding the types of movement that can occur, namely drying shrinkage, differential movement, deflection movement, structural movement, moisture movement and thermal movement, will help when deciding which type of movement joint will best counteract the resulting stresses.

In floors there are two basic types of movement joints, structural and non-structural. Both types will be subject to different movement patterns, for example, whether movement will occur from the tiled covering through to the floor slab or just in the tile and screed covering, and this will affect the type of joint needed to prevent damage.

Pre-formed joints can accommodate roughly 15-20 percent of their movement zone. The Schlüter®-DILEX range of movement joints offer complete protection and are available to specifiers in a wide selection of materials, colours and movement capability.

Click HERE for further information, Email: sales@schluter.co.uk or Tel: 01530 813396.

Facebooktwitterlinkedin